will any of my AEM pulleys work with a JRSC?

[gsrteggie]

I have a 94 GSR, w/ AEM underdrive pullies. Will these still work with a JRSC, or will I need to put stock pullies/belts back on?

[CROM]

Power steering and AC will work fine with the JRSC as you are not changing the belt/pulley configuration for these accessories..

<font color="#a62a2a" size="1">[ May 17, 2003 08:17 PM: Message edited by: CROM ]</font>

[Holden]

The PS and AC pulleys are fine. Alt pulley has to go.

[gsrteggie]

thanks

[JRCivic]

Actually, only the P/S pulley will work. There is no such thing as a replacement A/C pulley since it is actually the clutch assembly and pulley together. The crank pulley must remain stock (or larger), so one cannot use a aftermarket "underdrive" pulley unless it is specifically designed to overdrive the alternator and underdrive the P/S and A/C pumps. Unorthodox Racing has part numbers for this very application...

[CROM]

Ah,

I have been enlightened yet again. Maybe they could make a lightened A/C tensioner pulley [img]wink.gif[/img] bet they could sell a few of those to the ricers.

<font color="#a62a2a" size="1">[ May 19, 2003 08:24 AM: Message edited by: CROM ]</font>

[JRCivic]

It would be expensive Adam... it must have a bearing in the middle of it because the stock one is NOT removeable.

Maybe the rice-boys should send UR some E-mail requests for this fine idea...

heheh